Electrostatic surface paint AU-1061

This polyester and alkyd resins based paint is proper and formulated to final coating of vehicle bodies sprayed in electrostatic system and have the following features:

Chemical and mechanical resistance, good adhesiveness on all surfaces, very high shining and excellent strength against scratch and weather conditions   

Technical specifications:

 

Color:

Various

Hit

2 lb/ 30 in

Shining:

20: 80-90

Bending:

10 mm

Viscosity:

DIN-CUP4 60±10 Sec 

Adhesiveness

GT0

Density: gr/cm3

1.1 +/- 0.1

Hardness

Konig:Min 80 Sec

Persoze:Min 190 Sec

Solid %

58 +/- 5

Capping

Min 4 mm

Graining

Max 10 micron

Chipping

3 >= 500 gr

Coating

25-35 micron

Xeno test

500 hr

Salt spray

500 hr

Water resistance

240 hr

Thinner

Au-10116

Moisture resistance

240 hr

Time and temp. of baking

145 +/- 5 C/ 20-30 min

Electrical resistance

20-700 MΩ. cm

Flash off time

5- 10 min

 

 

Dry film THK

30- 40 micron

 

 

Further coating application:

N/A

 

 


Storage:

Keep in a cool, dry place away from direct sunlight, inside capped original packs, temp: 5-35 C, moisture: 50-70%

It may used up to 6 months under such conditions

Packing:

Low qty: 20 kg cans                               High qty: 200kg barrel

Surface preparation:

Soft grinding the lined surface in case of having unwanted particles. Then clean it using washing thinners and or fat-removers.

Usage guide:
Use AU-10116 thinner to dilute the paint. Add the thinner to the paint gradually and stir the mixture until a homogenous combination is resulted. Then spray the lining using compressed (4-5ATM) spray gun. Make the prepared paint’s viscosity reach roughly 20-24 sec in 23 C temperature by using DINCUP4.

Safety:

This paint is flammable. Therefore, keep it away from heat, sparkle and flames. Avoid direct contact with eyes and skin. If so, wish using abundant water and refer to see the physician, use proper goggles, gloves and mask upon working.