Double-parted killer acrylic (dry air|) AU-2089
Double-parted killer acrylic AU-2089
This acrylic resins based two parted force dry Metallic killer (second coating lacquer) is proper and formulated as second coating for metallic paints with code Au-2006 for repairs and have the following features:
Keep in a cool, dry place away from direct sunlight, inside capped original packs, temp: 5-35 C, moisture: 50-70% It may used up to 6 months under such conditions
Killer: 20 or 4 kg cans Hardner: 2 or 4 kg cans
Killer (second coating lacquer) is sprayed on all metallic paints first coatings of which their surfaces have roughly been dried.
irst mix killer with AU-20140000 code hardner (1:2 weight ratio) and use AU-10124 thinner to dilute the paint. Add the thinner to the paint gradually and stir the mixture until a homogenous combination is resulted. Then spray the lining using compressed (4-5ATM) spray gun. Make the prepared paint’s viscosity reach roughly 18-22 sec in 23 C temperature by using DINCUP4.
This paint is flammable. Therefore, keep it away from heat, sparkle and flames. Avoid direct contact with eyes and skin. If so, wish using abundant water and refer to see the physician, use proper goggles, gloves and mask upon working.