Epoxy ester lining AU-4060

This epoxy-ester resins based lining is formulated and suitable for the first lining and/or middle lining coating of vehicles and proper to apply for surface paints with alkyd resins and alkyd melamine and have the following features: Adhesiveness to different steel types and non-ferrous metals, Valuable chemical and mechanical resistance excellent anti corrosion features, even with over 50 micron fry film thickness

Technical specifications:

Color:

Various

Hit

2 lb/ 30 in

Shining:

60: 40-50

Bending:

10 mm

Viscosity:

(DIN-CUP4 70±10Sec(23˚C             

Adhesiveness

GT0

Density: gr/cm3

12.- 1.3

Hardness

Konig:Min:85 Sec
Persoze:Min:190 Sec

Solid %

64 +/- 3

Capping

Min 4 mm

Graining

Max 15 micron

 

 

Coating

25-30 micron

Water resistance

120 hr

Salt spray

500 hr

Moisture resistance

240 hr

Thinner

Au-10036

 

 

Time and temp. of baking

130-140 C/ 20-30 min

 

 

Flash off time

5-10 min

 

 

Dry film THK

40-50 micron

 

 

Further coating application:

n/a

 

 



Storage:

Keep in a cool, dry place away from direct sunlight, inside capped original packs, temp: 5-35 C, moisture: 50-70% It may used up to 6 months under such conditions

Packing:

Low qty lining: 20 kg cans                                      High qty Lining: 200 kg barrel

Surface

Clean the surface first. Applying phosphate method is

 

preparation:

recommended

Usage guide:

use AU-10036 thinner to dilute the paint if needed. Add the thinner to the paint gradually and stir the mixture until a homogenous combination is resulted. Then spray the lining using compressed (4-5ATM) spray gun. Make the prepared paint’s viscosity reach roughly 20-25 sec in 23 C temperature by using DINCUP4.

Safety:

This paint is flammable. Therefore, keep it away from heat, sparkle and flames. Avoid direct contact with eyes and skin. If so, wish using abundant water and refer to see the physician, use proper goggles, gloves and mask upon working.