Polyester lining AU-3000

This polyester and epoxy resins based lining is proper and formulated to coating of vehicle bodies with electrofroze lining (anodic, cathodic), and other aquatic and solvent anti corrosion linings and is consumed as the second lining of the melamine alkyd, acrylic, and double coated metallic surface paints, in most of automotive industries and have the following features: Excellent chemical and mechanical resistance, anti corrosion, good adhesiveness and good grinding

Technical specifications:

 

Color:

Various

 

 

Shining:

60: 75-90

Bending:

10 mm

Viscosity:

(DIN-CUP4 70±10Sec(23˚C               

Adhesiveness

GT0

Density: gr/cm3

1.3 +/- 0.1

Hardness

Konig: Min 75 Sec
Persoze: Min 180 Sec 

Solid %

65 +/- 5

Capping

Min 3 mm

Graining

Max 20 micron

Water resistance

240 hr

Coating

20-30 micron

Moisture resistance

240 hr

Salt spray

500 hr

 

 

Thinner

Au-10036

 

 

Time and temp. of baking

145 +/- 5 C/ 20-30 min

 

 

Flash off time

5- 10 min

 

 

Dry film THK

40-50 micron

 

 

Further coating application:

N/A

 

 


 
Storage:

Keep in a cool, dry place away from direct sunlight, inside capped original packs, temp: 5-35 C, moisture: 50-70% It may used up to 6 months under such conditions

Packing:

Low qty: 20 kg cans                                                             High qty: 200kg barrels

Surface :

Soft grinding the lined surface in case of having unwanted particles. Then clean it using washing thinners and or fat-removers. Phosphate methods for iron surfaces is recommended

preparation:

Then clean it using washing thinners and or fat-removers. Phosphate methods for iron surfaces is recommended

Usage guide:

Use AU-10036 thinner to dilute the paint. Add the thinner to the paint gradually and stir the mixture until a homogenous combination is resulted. Then spray the lining using compressed (4-5ATM) spray gun. Make the prepared paint’s viscosity reach roughly 20-25 sec in 23 C temperature by using DINCUP4.

Safety:

This paint is flammable. Therefore, keep it away from heat, sparkle and flames. Avoid direct contact with eyes and skin. If so, wish using abundant water and refer to see the physician, use proper goggles, gloves and mask upon working.