Wash primer AC-4020

This product with very good resistance has been formulated so that it may be used as alternative of alluding solvents which accelerates bleaching in polyurethane acrylic force dry and epoxy systems. Indicative specs include increased adhesiveness of surface, after being applied it is dried fast and makes a had and opaque layer


Technical specifications:


Color:

Yellow or green

Surface drying time

10 min

Shining

Opaque

Deep drying time

40 min

Viscosity:

DINCUP4 60±10sec

(23°c)

Gel time

4-6 hr

Density: gr/cm3

1.4 +/- 0.1

Dry film THK

6-10 micron

Solid %

70 +/- 2

Further coating application

1-8hr

Graining

Max 15 micron

 

 

Coating

Transparent

 

 

Flame point

n/a

 

 

Thinner

AC-10041

 

 

Hardner

AC-40132000

 

 

 

Storage:

Keep in a cool, dry place away from direct sunlight, inside capped original packs, temp: 5-35 C, moisture: 50-70%

Packing:

 

Primer- 4-20 cans

Hardner: 1-4kg cans

Surface preparation:

Prepare the new or bleached aluminum surface with scotch brite type a, so that a smooth surface is made. Remove fat and clean the surface then apply wash primer

Using instruction:

First mix wash primer with hardner (1:1 weight ratio) and use AU-10041 thinner to dilute the paint if needed. Add the thinner to the paint gradually and stir the mixture until a homogenous combination is resulted. Then spray the lining using compressed (4-5ATM) spray gun. Make the prepared paint’s viscosity reach roughly 20-25 sec in 23 C temperature by using DINCUP4.the mixed paint cannot be used loner than 4-6 hrs.

Ensure capping the hardner container after consumption

Safety:
This paint is flammable. Therefore, keep it away from heat, sparkle

and flames. Avoid direct contact with eyes and skin. If so, wish using abundant water and refer to see the physician, use proper goggles, gloves and mask upon working